EB 2 x 26-42 W BCD42.2Q-01/220-240/DALI dimmable
Electronic ballast BCD42.2Q-01/220-240/DALI – dimmable * Same housing as non-dimmable electronic ballast (123 x 102 x 33 mm) * Multipower technology: for different lamps on just one device * Twingle operation with 1 or 2 lamps * Very low thermal output...
EB 2 x 36W T8 BCS36.2FX-11/220-240 not dimmable
Hüco BCS36.2FX-11/220-240 – electronic ballast The ballast unit offers a space-saving installation in lights, and is suitable for T8 high-efficiency lamps. It is distinguished by its resistance to surges up to 320 VAC 48 h/ 350 VAC 2 h. It produces...
EB 3/4 x 18 W T8 BDC18.3-4LR01/220-240
Electronic ballast BCS18.3-4LR-01/220-240 – not dimmable for 3-4 x 18 W T8 * Construction height just 28 mm * Large input voltage range and output consistency through active harmonic filter * Very low thermal output due to minimal energy dissipation...
EB 3x14 W T5 BCD14.3F-01/220-240/1-10V dimmable
Dimmable electronic ballast BCD14.3F-01/220-240/1-10V (3 x 14 W T5) - Dimmable 1-10 V in a range of 1-100% - Can operate several lamps from one device - Maximum lifespan thanks to warm lamp start - Safety shutdown in the case of abnormal operation in...
EB 4x14 W T5 BCD14.4F-01/220-240/1-10V dimmable
Dimmable, electronic ballast BCD14.4F-01/220-240/1-10V for 4 x 14 W T5 - Dimming interface: 1-10 V- Dimming range 1-100% - Multipower technology: suitable for the operation of several lamps from one device - Energy-controlled warm lamp start to protect...
EB BCC 116 28 W T5 220/240 V
For 1x/2x 18 W TC-DEL/TEL: ECG BCS18.1-2Q-01/220-240 - optionally 1 or 2 illuminants can be connected ("Twingle" operation) - hardly any flickering or flickering, no noise - minimal power dissipation - active harmonic filter - Harmonics limitation (EN...
EB BCS35.1FX-11/220-240 14-35 W T5
Electronic ballast BCS35.1FX-11/220-240 for T5 bulbs - Short, flat housing for space-saving installation - Multipower technology: makes it possible to use bulbs of different wattages in one device - Energy-controlled warm lamp start to protect the electrodes...
EB BCS49.1FX-11/220-240 1 x 49 W T5
Branded electronic ballast Hüco BCS49.1FX-11/220-240 1 x 49 W T5 – not dimmable - Short, flat housing for space-saving installation - Energy-controlled warm lamp start to protect the electrodes to ensure maximum bulb life; switching cycle - Cut-off...
EB BCS49.2FX-11/220-240 2 x 49 W T5
Electronic ballast BCS49.2FX-11/220-240 2 x 49 W T5 – not dimmable - Short, flat housing for space-saving installation - Energy-controlled warm lamp start to protect the electrodes to ensure maximum bulb life; switching cycle - Cut-off technology: minimal...
EB EBS21.1M-01/220-240 1x13-21W T5/TC-DEL/TEL
Branded electronic ballast Hüco EBS21.1M-01/220-240 1 x 13-21 W T5FH / TC-DEL / TEL * Construction height just 22 mm * System power up to 25 W * Multipower technology: can operate various lamps and powers from one device * Safety shutdown in the event...
EB PC 1/2 x 26–42 W TC PRO
TRIDONIC PC 1/2x26-42 TC PRO 220-240 - electronic ballast The ballast has twingle technology and can be operated with one or two lamps. The small design and the digital ASIC technology are convincing. Develops hardly any noise and hardly any heat and...
Electr. ballast T8 QTi DALI 2x58 dimmable
Electronic ballast Quicktronic Intelligent QTi DALI 2x58W DIMMABLE for T8 fluorescent tubes - OSRAM - Supply voltage: 220…240 V - power frequency: 0, 50…60 Hz - Mains voltage: 198…264 V - For usage in emergency lighting systems in accordance with...
Electronic ballast 1 x 18-26 W T5 T8 TC-L TEL
Electronic ballast EBS26.1M-01/220-240 for T5, T8 and compact fluorescent lamps up to 25 watts * Compact height of just 22 mm * Suitable for use with different bulbs and powers * Safety shutdown in the event of abnormal bulb operation, tested in line...
Electronic ballast PTi 70/220-240 l
Electronic ballast Powertronic Intelligent PTI I for HID bulbs - OSRAM PTi I - simple, practical with strain relief - Expanded clamp range allows for the looping of the mains - Screw fixed cable clamp for reliable strain relief - Screw-less plug clamps...
Electronic ballast QT-M 2x26-42 W
Electronic ballast Quicktronic QT-M 2 x 26-42W - OSRAM - Supply voltage: 230…240 V - power frequency: 0, 50…60 Hz - Mains voltage: 198…254 V - For usage in emergency lighting systems in accordance with EN 50172/DIN VDE 0108-100 - Same light current...
Electronic ballast QTP-FC 1x55 W
Electronic ballast Quicktronic QTP-FC 1X55/220-240 for T5 ring tube - OSRAM - Supply voltage: 230…240 V - power frequency: 0, 50…60 Hz - Mains voltage: 198…254 V - For usage in emergency lighting systems in accordance with EN 50172/DIN VDE 0108-100...
EVG Quicktronic Professional T/E 2x18
EVG Quicktronic Professional T/E Automatic safety shut down with defective bulb and at the end of the bulb's lifespan Automatic turn on after bulb change Approval mark: ENEC-10-mark, VDE-mark, EMV-mark Additional characteristics: EOL-mark, cut-off mark...
Flex connector 100 cm for Max LED strip
Flex connector for Max LED strip: 100 cm long This connection cable can be used to bridge short distances and to level uneven surfaces when using the Max LED strip system. It is also suitable for use in tight radii or for changing the level. - easy installation...
FLVWR 1500 - through line for strip lights
Through cable FLVWR 1500 This through cable can be used for continuous row LED/T5/T8 surface-mounted and pendant luminaires.
For strip system Max LED - flex connector 10 cm
10 cm long: Max LED flex connector The Max LED flex connector for the strip system of the same name can be used to level uneven areas, to extend or to bridge. With a plug system for easy installation. - 5-pole
Frame for Galileo LED panel 119.7 x 29.7 cm
Mounting frame for rectangular LED panel Galileo The rectangular LED panel Galileo can also be used as a surface-mounted ceiling light with this mounting frame.
Frame for Galileo LED panel 61x61cm
Mounting frame for square LED panel Galileo With this mounting frame, the square LED panel Galileo can also be used as a surface-mounted ceiling light.
Fuse link, 50A
NHC fuse link for 50A Size 00, with voltage-free gripping plates, slim construction, VE 3 Fuse link, NHC 00 SFL
Fuse link, 63A
NHC fuse link for 63A Size 00, with voltage-free gripping plates, slim construction, VE 3 Fuse link, NHC 00 SFL
GU10 socket for Hyde downlights
GU10 socket for Hyde recessed luminaires This GU10 lampholder is used to equip and as a spare part for the recessed luminaires from the Hyde series.
HF-P 158 TL-D III 230 V ballast for T8
HF-P 158 TL-D III 230 V ballast for 1 x 58 W T8 - not dimmable A T8 tube bulb can use this electronic, non-dimmable ballast. - For 1 x T8 58 W, 70 W or 1 x TC-L 55 W - Connection voltage: 230 V - Best possible energy efficiency class EEI A2 BAT - Service...
HID-AspiraVision Compact ballast MW 35-70W
HID-AspiraVision Compact 35 - 70W /I CDM MultiWatt ballast - PHILIPS The MultiWatt ballast AspiraVision Compact is the new and innovative electronic ballast from Philips for CDM bulbs. Through the innovative switch function, which allows for the setting...
Installation pot for alu-zinc installed lamps
Installation pot for aluminium-zinc installed lamps for light bulbs up to max 35 W, diameter 71 mm, for GU5.3 socket
IW-Dimmer for 800VA / 1000W
Powerful in-wall dimmer for 800VA / 1000 W Leading edge dimmer for inductive load (transformers) up to 800VA or Ohm load up to 1000W. With pressure/alternate switch, with pure white cover, not combinable 75-1000 W Ohm load, 25-800VA inductive load
LED 24 connection cable 0.5 m
LED 24 Connection cable 0.5 m The connecting cable has a length of 0.5 m and is equipped with an LED 24 plug. The plug has a diameter of 8.5 mm so that it fits through a 9 mm hole without any problems. The cable can be loaded up to a maximum of 48 W.
LED 350 connection cable, 1 m
LED 350 connecting cable including LED 350 coupling - length: 1m - 2-core - Nominal cross section: 0.34 mm²
LED 350 triple distributor, 20 cm
LED 350mA triple distributor 20 cm long connection cable with plug and 350 mA plug for three LED recessed lights LED Eye 25S.
LED ballast - 6 W
LED ballast - 6 W - For standard LEDs (> 0.1 W), constant voltage - Input voltage 220-240 AC 50-60 Hz - Output voltage 12V DC 0.5A - Ballast suitable for installation and surface mounting - Including protection against short-circuiting, overheating and...
LED driver 12V. const. mirror 30W Optotronic IP66
LED driver 12V. const. mirror 30W Optotronic OT 30/220-240/12 P, IP66 - OSRAM Constant voltage LED driver with fixed outgoing voltage of 12V and a max. outgoing power of 30W to control 12V LED modules. Characteristics: - Intelligent output adjustment...
LED driver 24V. const. mirror 50W Optotronic IP20
LED driver 24V. const. mirror 50W Optotronic OT 50/220-240/24 P, IP67 - OSRAM Constant voltage LED driver with fixed outgoing voltage of 12V and a max. outgoing power of 60W to control 12V LED modules. Characteristics: - Intelligent output adjustment...
LED Driver 24W 24 V for Fabas Luce Galway 6690
LED Driver 24W 24 V for Fabas Luce Galway 6690 2x 1.5 m connection cable
LED Driver 36W 24 V for Fabas Luce Galway 6690
LED Driver 36W 24 V for Fabas Luce Galway 6690 2x 1.5 m connection cable
LED Driver 6 W 24 V for Fabas Luce Galway 6690
LED Driver 6 W 24 V for Fabas Luce Galway 6690 1.5 m connection cable
LED driver for Aqua pond lights
LED driver Mean Well 25W Single Output 25W IP67 This LED driver is suitable for the underwater lights Aqua Spotlight AISI 316 and Aqua Recessed AISI 316. Technical data: - Output12 V DC - Not more than 25,2 W
LED power supply 12W, 12V
LED power supply 12W, 12V Independent, short-circuit resistant transformer, which can be mounted on materials for which the combustion properties are known.
LED power supply 24 V DC/12 W round for switch box
LED power supply unit with 24 V/ 12 W - 24 V constant voltage - maximum output power of 12 W - incl. 12.5 cm primary and 14.5 cm secondary cable - suitable for installation in switch boxes with a diameter of 6 cm
LEDS-C4 suspension system Caprice LED ceiling lamp
Suspension for ceiling light Caprice in classic white Thanks to this suspension, the Caprice luminaire can be mounted with up to 150 cm suspension. The frame and canopy are finished in a classic white. The overall concept with its simple appearance does...
LED transformer
Transformer - specially designed for LED operation - 12V AC - max. 20 watt - transformer output 20 VA - cable on both sides 20 cm
LED transformer 1-15 W DC 24 V, 12-way distributor
LED transformer 1-15 W DC 24 V, 12-way distributor - Network connection cable 2 m with Europlug. Connection: 220-240 V/0-50/60 MHz Consumption: 1-15 W Constant 24 V DC Max. feeder length of the secondary cables: 5 m per cable With memory function
LED transformer 12W Power Supply
LED transformer power supply with 6-times distributor - particularly small LED installed lamps are space-saving, environment-friendly and provide for good light - but where should the control device go? The LED power supply offers an innovative solution:...
LED transformer 24/30 W DC 24 V 12-way distributor
LED transformer 24/30 W DC 24 V 12-way distributor - connection: 220-240 V / 0-50/60 Hz - performance: 1-30 W - constant 24 V DC - safe in event of short circuit, overload and idling - max. permissible length of secondary lines: 5 m per cable
LED transformer 24/75 W DC 24V,12-way distributor
Capacity is what is on offer here – LED transformer with 12 plug-in slots The LED transformer 24/75 W DC 24 V has 12 plug-in slots. Its consumption per distribution socket is between 1 and 15 watts. The maximum length (power cable) of the secondary...
Lucande Corban power point pillar up to max. 3680W
Corban power point pillar with IP44 Thanks to its streamlined shape and its simple colour, the Corban power point pillar is a visually understated alternative for the power supply in the garden. Corban has two power points and is designed for a total...
Master remote control for sensor-controlled lights
Master remote control for sensor-controlled luminaires from Performance in Lighting This remote control allows you to fine-tune the automatic control of Performance in Lighting's LED luminaires, which are controlled by daylight and presence sensor. In...
Max spray water protected safety box
Max safety box protects cable and coupling connections in the outdoor area This safety box is made of plastic and serves well in the outdoor area, in which for example the supply lines for Christmas lights or lighting and electrical devices are effectively...
Mean Well switching power supply
White switched-mode power supply unit for the 24-V output The white switched-mode power supply unit for the 230 V input and output conversion to 24 V works with 4.2 A, 100 W and has the IP code IP67.
Multipole Connection Distributer for Galway 6690
Multipole connection distributer 8x for Galway 6690 1 input 8 outputs Connection distributer for supplying several Galway 6690 under lights with one power supply unit. The optional power supply is connected to the distributer input which supplies lights...
Multi-travel plug adapter set in white
Multi travel plug adapter set in white Where are you travelling to next? This practical plug adapter set is available in white and has a shockproof socket. The set consists of country adapters for America, Australia, the UK, Italy and Switzerland A travel...
OSRAM 105VA transformer Halotronic Pro HTL
Electronic transformer Halotronic Professional HTL - OSRAM Application data: - Dimmable through phase dimmer for inductive loads - Particularly large temperature range of -20° ... +50°C - High energy efficiency 90% (in accordance with ErP 2012/1194/EC),...
OSRAM 150VA transformer Halotronic Mouse
Electronic transformer Halotronic Mouse - OSRAM Application data: - dimmable - Dimmer: Phase dimmer for inductive loads - Protection rating IP20 - Protection from ignition F, MM - Short-circuit protection: Automatically reversible - Overload protection:...
OSRAM 225VA tf Halotronic Professional HTL
Electronic transformer Halotronic Professional HTL - OSRAM Application data: - Dimmable through phase dimmer for inductive loads - Particularly large temperature range of -20° ... +50°C - High energy efficiency 90% (in accordance with ErP 2012/1194/EC),...
OSRAM 70VA transformer Halotronic Mouse
Electronic transformer Halotronic Mouse - OSRAM Application data: - dimmable - Dimmer: Phase dimmer for inductive loads - Protection rating IP20 - Protection from ignition F, MM - Short-circuit protection: Automatically reversible - Overload protection:...
Paulmann Clever Connect LED driver 12 W 3-way
LED driver Clever Connect 12 W with triple distributor for furniture lights This Clever Connect LED driver can be used to connect a wide variety of furniture lights. It can be loaded up to max. 12 W and is suitable for up to three luminaires thanks to...
Paulmann Clever Connect LED driver 25 W 4-way
LED driver Clever Connect 25 W with 4-way distributor for furniture lights Up to four LED furniture luminaires with a total wattage of up to 25 W can be connected simply and easily with this Clever Connect LED driver using a plug-in system. The LED driver...
Paulmann Clever Connect LED driver 36 W 8-way
LED driver Clever Connect 36 W for up to 8 furniture lights The Clever Connect LED driver can be used to connect up to 8 furniture lights. It is equipped with a supply cable with Euro plug. The luminaires can be easily connected via the 8-way distributor...
Paulmann MaxLED Invisible connector 3 m
Practical, self-adhesive MaxLED Invisible Connector with 5-pin plug The MaxLED Invisible Connector is designed for the MaxLED Stripes and offers a practical, invisible connection possibility for several Stripes. This turns the design into a true experience...
Paulmann MaxLED Invisible connector 5 m
Practical, self-adhesive MaxLED Invisible Connector with 5-pin plug The MaxLED Invisible Connector is designed for the MaxLED Stripes and offers a practical, invisible connection possibility for several Stripes. This turns the design into a true experience...
Paulmann MaxLED power supply 230/24 V max. 40 W
Power Supply 230/24 V for LED strips of the MaxLED series - can be loaded up to a maximum of 40 W - long life span - with plug connectors for direct connection of MaxLED strips or various accessories
Paulmann MaxLED power supply 230/24 V max. 60 W
Power Supply 230/24 V for LED strips of the MaxLED series - up to maximum 60 W - integrated short-circuit and overload protection - integrated temperature monitor + electronic fuse
Paulmann Profi VDE e-trafo 105VA 105 W
VDE Profi transformer 230/12V, 105VA, 35-105 W - Double primary connection for multiple transformers in a switch - With a 50° C ambient temperature - NYM cable suitable - Peerpetual strain relief and cap - Compatible with all leading and trailing edge...
PC 2 x 58 W T8 PRO sl
Electronic ballast Tridonic PC 2 x 58 W T8 PRO sl 2 x 58 W T8 - non-dimmable - Short housing in flat design for space-saving installation in luminaires - Best possible energy efficiency class EEI = A2BAT - Suitable for operating T8 and TC-L high efficiency...
POTTA housing for HV recessed spotlight 68 mm
POTTA - installed casing for HV recessed spotlight 68 mm - suitable for recessed spotlights with a 5.1 cm instatllation diameter - GU10 base, max. 35 W - 230 V
Power supply for LED lights with Euro plug
Power supply for 12VDC LED furniture lights Electronic power supply for LED furniture lights - primary voltage: 100 to 240 volts AC (50/60 Hz) - Secondary voltage: 12 volts DC - Euro plug with 1.5 metres black cable (input) - Line 0.3 metres with AMP...
Primera line DT digital weekly timer
Switch devices on or off automatically with the Primera line DT weekly timer The Primera line DT digital weekly timer is the perfect timer for all electrical devices in the house. With child protection. Technical data: - display for days of the week,...
QTI 2 x 28/35/49/54 W electronic ballast unit
QTP5 2 x 54 W electronic ballast unit Quicktronic Professional for T5 lights - made by OSRAM The ballast unit benefits from a broad range of applications, a useful life of 100,000 hours and a high switching capacity. The automatic restart following a...
Rademacher 2-channel wall transmitter
Two-channel handheld / wall transmitter - practical radio-controlled door opener Two channel radio transmitter for installation on the wall Used to control RolloPort garage door drives. Battery-powered with 1 x 3 V CR2032 (included) - Radio frequency:...
Rademacher Micro 2-channel transmitter, S2 and SX5
Micro two-channel handheld transmitter - door opener for S2 and SX5 garage door drive This micro handheld transmitter allows you to easily and safely control the electronic RolloPort S2 or SX5 garage door drives by radio. Thanks to its two channels, the...
Rademacher Modi belt box timer, white
Modi belt box timer from the RolloHomeControl series for controlling shutter motors A convenient solution and easy to upgrade - the Modi belt box timer can be installed in existing belt box openings and replaces manual belt winders. In conjunction with...
Rademacher radio code switch for RolloPort
Radio-controlled code switch for RolloPort garage drives This code switch communicates via radio waves and can be connected to a RolloPort garage drive. It can be mounted on the wall as you wish and has a clear keypad. It works in a similar way to a code...
Rademacher RolloPort S2 garage door motor 314 cm
Electric RolloPort S2 garage door drive - for convenient garage door control RolloPort S2 is an electric garage door motor that can be used to control all common up-and-over and sectional doors. It provides extensive comfort functions such as automatic...
Rademacher RolloPort S2 garage door motor 374 cm
Electric RolloPort S2 garage door drive - for convenient garage door control RolloPort S2 is an electric garage door motor that can be used to control all common up-and-over and sectional doors. It provides extensive comfort functions such as automatic...
Rademacher sun/twilight sensor 0.75 m
Solar sensor to control of RolloTron and Troll on the basis of the light level This light sensor is fixed to the window pane by a suction cup. It is compatible with various RolloTron belt winders and Troll timers; the connector is simply inserted into...
Rademacher sun/twilight sensor 1.5 m
Sun sensor for controlling RolloTron and Troll This sensor is available for controlling the shutters on the basis of the light level in conjunction with a RolloTron belt winder or a Troll timer. The light level sensor is fixed to the glass window pane...
Rademacher Troll Basic timer, white
White Troll Basic shutter control with a timer, without radio control, incl. cover frame Troll Basic responds to the demand for a high-quality control solution for motorised shutters without radio control. The simple Troll Basic control unit from the...
Rademacher Troll Comfort timer, white
Troll Comfort timer in white from the RolloHomeControl series - control for motorised shutters This high-quality Troll Comfort timer is simple and functional. It is designed to control shutters that are driven by tubular motors. The automation of the...
Rademacher Troll Standard timer, white
Troll Standard timer for shutter control without radio control from the RolloHomeControl series This timer for motorised shutters has a simple design and many different functions. Setting up the controls is easy, convenient and quick – whether it is...
Remote control for ActiLume DALI
Remote control IRT9090/00 for ActiLume DALI This remote control serves as commissioning tool for the ActiLume DALI gen2 system and Lights with ActiLume.
Safety box IP44
Small safety box IP44 - For the safe connection of couplers and connectors - Protects against rain and sunshine - can be used in the garden, cellar, when camping - Child safe
Safety transformer 15-20 W
Safety transformer, available in different sizes - Cast in the insulating casing - Including microfuse - Input 230V AC - Output 12V AC - Dimmable with leading edge dimmer - Connection 2 x 0.75 mm² - Primary 1.5 m cable with Europlug Dimensions overview:...
Safety transformer 20-30 W
Safety transformer, available in different sizes - Cast in the insulating casing - Including microfuse - Input 230V AC - Output 12V AC - Dimmable with leading edge dimmer - Connection 2 x 0.75 mm² - Primary 1.5 m cable with Europlug Dimensions overview:...
Safety transformer 30-40 W
Safety transformer, available in different sizes - Cast in the insulating casing - Including microfuse - Input 230V AC - Output 12V AC - Dimmable with leading edge dimmer - Connection 2 x 0.75 mm² - Primary 1.5 m cable with Europlug Dimensions overview:...
Safety transformer 3-10 W
Safety transformer, available in different sizes - Cast in the insulating casing - Including microfuse - Input 230V AC - Output 12V AC - Dimmable with leading edge dimmer - Connection 2 x 0.75 mm² - Primary 1.5 m cable with Europlug Dimensions overview:...
Safety transformer 40-50 W
Safety transformer, available in different sizes - Cast in the insulating casing - Including microfuse - Input 230V AC - Output 12V AC - Dimmable with leading edge dimmer - Connection 2 x 0.75 mm² - Primary 1.5 m cable with Europlug Dimensions overview:...