Connection cable for Cabinet Light panel
Connection cable for Cabinet Light Panel, 10 cm This connecting cable is used to couple the first Cabinet Light panel under-cabinet light with another light. In this way a maximum of four units can be operated together.
GU10 socket for Hyde downlights
GU10 socket for Hyde recessed luminaires This GU10 lampholder is used to equip and as a spare part for the recessed luminaires from the Hyde series.
LED 24 connection cable 0.5 m
LED 24 Connection cable 0.5 m The connecting cable has a length of 0.5 m and is equipped with an LED 24 plug. The plug has a diameter of 8.5 mm so that it fits through a 9 mm hole without any problems. The cable can be loaded up to a maximum of 48 W.
LED 350 connection cable, 1 m
LED 350 connecting cable including LED 350 coupling - length: 1m - 2-core - Nominal cross section: 0.34 mm²
E27 lamp socket
E27 lamp socket with insulation hanging and cable relief - 15 centimetre cable - with screw terminals - T210°C / 100 watt
Socket for low-volt halogen reflector lamps
Socket for low-volt halogen reflector lamps GU5.3 (MR16) with holder
SB universal fitting for installed lamps
SB universal fittings for light bulb sockets G4 12V, GX5,3, GY6, 35
Connection cable 2 m for recessed light SR 45 LED
2 m long connection cable for the recessed light SR 45 LED
Connection cable 2x0.75² with switch
Connection cable 2x0.75² H03 V VH2-F with switch With Euro plug and insert.
Dynamic connection cable 1 m
Dynamic connection cable 1 m - For extension between light and distributor
Connection cable 3x0.75² with shock-proof plug
Connection cable 3x0.75² H03 V V-F With shock-proof plug.
Connective shrink tubing Light Stone Concrete
Connective shrink tubing for installing LED recessed floor light Light Stone Concrete - 10 cm - incl. two pressure dressings
Dynamic four-way distributor
Dynamic four-way distributor - 10 cm cable with dynamic plug - For three additional connection cables at the distributor
Connection cable 3x1.0² with shock-proof plug
Connection cable 3x1,0² H03 V V-F With shock-proof plug.
Spacer for hollow ceilings
Spacer for non-flammable glass fibre hollow ceilings reinforced plastic This spacer covers the open area behind the recessed halogen lights and reduces fire risk. Can be mounted afterwards without any problems For holes of Ø 62 to Ø 90 mm Increases...
Dynamic connection cable 2.5 m
Dynamic connection cable: suitable for extension between light and distributor The dynamic connection cable with 2.5 metre length is required to create a connection between the light and the distribution station. This is generally needed when the light...
Connection cable 3x0.75² with switch
Connection cable 3x0.75² H03 V V-F with switch With shock-proof plug and insert.
Connection cable 3x1.5² with shock-proof plug
Connection cable 3x1,5² H03 V V-F With shock-proof plug.
Fuse link, 63A
NHC fuse link for 63A Size 00, with voltage-free gripping plates, slim construction, VE 3 Fuse link, NHC 00 SFL
Fuse link, 50A
NHC fuse link for 50A Size 00, with voltage-free gripping plates, slim construction, VE 3 Fuse link, NHC 00 SFL
AMP 6-fold adapter
6-fold adapter AMP The AMP 6-fold adapter is equipped with temperature and short circuit protection and is ideal for small spaces, for example behind pictures and mirrors.
Cable extension for constant current plug connec.
Cable extension for constant current plug connection 1m, max 3A With the cable extension for LED lamp system, the system can be individually expanded. Total length 1 m, max 3 A, suitable for 350mA, 700mA, 1000mA constant current
Two Magnetic holders for furniture light Pipe F
Transparent magnetic holder for LED linear light Pipe F
AcTEC Mini LED driver CV 12 V, 6 W, IP20
Constant voltage LED driver Mini 12V 6W, not dimmable - compact design - universal AC input - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 100-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature...
LED 350 triple distributor, 20 cm
LED 350mA triple distributor 20 cm long connection cable with plug and 350 mA plug for three LED recessed lights LED Eye 25S.
AcTEC Mini LED driver CV 24 V, 6 W, IP20
Constant voltage LED driver Mini 24V 6W, not dimmable - compact design - universal AC input - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 100-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature...
For strip system Max LED - flex connector 10 cm
10 cm long: Max LED flex connector The Max LED flex connector for the strip system of the same name can be used to level uneven areas, to extend or to bridge. With a plug system for easy installation. - 5-pole
Safety box IP44
Small safety box IP44 - For the safe connection of couplers and connectors - Protects against rain and sunshine - can be used in the garden, cellar, when camping - Child safe
AcTEC Slim LED driver CV 24 V, 6 W
Constant voltage LED driver Slim 24V 6W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature -20 to +50 °C
Multipole Connection Distributer for Galway 6690
Multipole connection distributer 8x for Galway 6690 1 input 8 outputs Connection distributer for supplying several Galway 6690 under lights with one power supply unit. The optional power supply is connected to the distributer input which supplies lights...
FLVWR 1500 - through line for strip lights
Through cable FLVWR 1500 This through cable can be used for continuous row LED/T5/T8 surface-mounted and pendant luminaires.
Stand for Little Sun Charge solar light
Stand for the LED solar light Little Sun Charge With this stand, the LED solar light Little Sun Charge can also be used as a practical table light - whether camping or at home.
AcTEC Slim LED driver CV 12V, 6W
Constant voltage LED driver Slim 12V 6W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature -20 to +50 °C
Adapter for LED driver w/constant current, 10 cm
Plug connector for LED driver with constant current, max 3 A Total length 10 cm, suitable for 350mA, 700mA, 1000mA constant current
AcTEC Slim LED driver CV 24 V, 12 W
Constant voltage LED driver Slim 24V 12W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature -20 to +50 °C
Installation pot for alu-zinc installed lamps
Installation pot for aluminium-zinc installed lamps for light bulbs up to max 35 W, diameter 71 mm, for GU5.3 socket
Switched-mode power supply unit, 12 V, 6 W
Switched-mode power supply unit, 12 Volt, 6 W This switched-mode power supply unit can be used to connect the mirror lights; lights up to a maximum of 6 W can be connected to it.
AcTEC Slim LED driver CV 12V, 12 W
Constant voltage LED driver Slim 12V 12W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature -20 to +50 °C
Spot Box - an assembly box for recessed spots
Assembly box for recessed spotlights – Spot Box The Spot Box is ideal for use in all ceilings made from flammable materials. The box does not just protect the spotlight from dust and moisture, the seal of the moisture barrier remains protected and the...
Cable tree for constant current plug connector, 1m
2-piece cable tree for constant current plug connector (JST), incl. 1 short circuit plug Total length 1 m, max 3 A, suitable for 350mA, 700mA, 1000mA constant current
POTTA housing for HV recessed spotlight 68 mm
POTTA - installed casing for HV recessed spotlight 68 mm - suitable for recessed spotlights with a 5.1 cm instatllation diameter - GU10 base, max. 35 W - 230 V
Flex connector 100 cm for Max LED strip
Flex connector for Max LED strip: 100 cm long This connection cable can be used to bridge short distances and to level uneven surfaces when using the Max LED strip system. It is also suitable for use in tight radii or for changing the level. - easy installation...
OSRAM 70VA transformer Halotronic Mouse
Electronic transformer Halotronic Mouse - OSRAM Application data: - dimmable - Dimmer: Phase dimmer for inductive loads - Protection rating IP20 - Protection from ignition F, MM - Short-circuit protection: Automatically reversible - Overload protection:...
20399 LED plug-in power supply 10 W for Aqualine
Suitable LED plug-in power supply unit for the operation of LED light strip Aqualine This LED plug-in power supply unit has an output of 10 watts and helps to start up the LED light strip Aqualine. It is small and handy and can be easily plugged into...
Switching power supply 3W for Superline
Switching power supply for LED furniture light Superline - 3 watts - 12 V DC
Wall bracket for Sistronic Allround LED table lamp
With the practical wall bracket, the SISTRONIC Allround LED table luminaire can be easily mounted on the wall.
AcTEC Mini LED driver CV 12 V, 12 W, IP65
Constant voltage LED driver Mini 12V 12W, not dimmable - very compact design - SELV insulation - IP65 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0,5 W - Ambient temperature -20 to +50...
Switched-mode power supply unit, 12 V, 12 W
Switched-mode power supply unit, 12 Volt This switched-mode power supply unit can be used for the Korona LED furniture light. - max. 12 W - 1.0 A
AcTEC Mini LED driver CV 24 V, 12 W, IP65
Constant voltage LED driver Mini 24V 12W, not dimmable - very compact design - SELV insulation - IP65 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0,5 W - Ambient temperature -20 to +50...
AcTEC Slim LED driver CV 24 V, 20 W
Constant voltage LED driver Slim 24V 20W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature -20 to +45 °C
AcTEC Slim LED driver CV 12V, 20 W
Constant voltage LED driver Slim 12V 20W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0.3 W - Ambient temperature -20 to +45 °C
Stable cable channel made of PVC, crush-resistant
Cable is covered securely and is crush-resistant with the PVC cable channel The PVC cable channel is divided into three chambers (for a cable with a diameter of 8 mm and two wires each of 7 mm diameter). It also has two holes for affixing. The cable channel...
Drawbar E27, length 40-120 cm, white
Drawbar E27, length 40-120 cm adjustable, up to 2 kg, bulb up to a max of 60 watts
Drawbar E27, length 40-120 cm, black
Drawbar E27, length 40-120 cm adjustable, up to 2 kg, bulb up to a max of 60 watts
Drawbar E27, length 40-120 cm, brown
Drawbar E27, length 40-120 cm adjustable, up to 2 kg, bulb up to a max of 60 watts
Drawbar E27, length 40-120 cm, gold
Drawbar E27, length 40-120 cm adjustable, up to 2 kg, bulb up to a max of 60 watts
SLV connection box 5-pin IP68
5-pin connection box for outdoor use This connection box is suitable for 5-pin cables with a diameter between 8 and 17 mm. With protection class IP86 especially suitable for outdoor use.
Suspension set for Duelis II ceiling light
Steel cable suspension with round canopy for LED ceiling light Duelis II The LED ceiling light Duelis II can be mounted as a pendant with this suspension set.
Downlight adapter JERRY white
Round adapter for downlights The adapter JERRY is suitable for downlights with a maximum of 50 watts. Installed diameter of 75 to 120 millimetres can be reduced to 68 to 70 millimetres with this adapter.
Downlight adapter JERRY brushed iron
Round adapter for downlights The adapter JERRY is suitable for downlights with a maximum of 50 watts. Installed diameter of 75 to 120 millimetres can be reduced to 68 to 70 millimetres with this adapter.
Switch power supply Mean Well 18 W
White switched-mode power supply unit for conversion into 24 V DC The switched-mode power supply unit converts the input of 230 V AC into an output of 24 V DC, is equipped with the IP code IP67 and works under 0.75 A and 18 W.
Rademacher sun/twilight sensor 0.75 m
Solar sensor to control of RolloTron and Troll on the basis of the light level This light sensor is fixed to the window pane by a suction cup. It is compatible with various RolloTron belt winders and Troll timers; the connector is simply inserted into...
TUBE spiral hose for cable-bundling
The ideal solution to reduce cable clutter in your home With the TUBE spiral hose, several cables lying around can be bundled together and protected. With the enclosed tool the fitting of the spiral hose is not a problem.
AcTEC Slim LED driver CV 24 V, 30 W
Constant voltage LED driver Slim 24V 30W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0,5 W - Ambient temperature -20 to +40 °C
Transformer LED 24 5 W DC 24 V
Transformer LED 24/ 5 W DC 24 V - with a six-way distributor - Including network connection cable (2 m) with Europlug
AcTEC Slim LED driver CV 12V, 30 W
Constant voltage LED driver Slim 12V 30W, not dimmable - ultra-thin design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0,5 W - Ambient temperature -20 to +40 °C
LED transformer 12W Power Supply
LED transformer power supply with 6-times distributor - particularly small LED installed lamps are space-saving, environment-friendly and provide for good light - but where should the control device go? The LED power supply offers an innovative solution:...
LED ballast - 6 W
LED ballast - 6 W - For standard LEDs (> 0.1 W), constant voltage - Input voltage 220-240 AC 50-60 Hz - Output voltage 12V DC 0.5A - Ballast suitable for installation and surface mounting - Including protection against short-circuiting, overheating and...
Max spray water protected safety box
Max safety box protects cable and coupling connections in the outdoor area This safety box is made of plastic and serves well in the outdoor area, in which for example the supply lines for Christmas lights or lighting and electrical devices are effectively...
ZTR-2040-106 LED power supply 24 V DC 20 W
LED power supply unit 24 V DC, 20 W, not dimmable Safe 24 V DC transformer with very small dimensions. - suitable for all luminaires driven by 24 V - no minimum load, max. 20 W - with overheating protection, short circuit protection and overload protection
Suspension system for ceiling light Declan II
Steel wire suspension system for the Declan II LED ceiling light This steel wire suspension system can be used to turn the square Declan II LED ceiling light into a pendant light.
Comfortable eco-line CSA 1 switch adapter
Switch electrical devices on and off via a foot switch The EL CSA 1 adapter has a 1.5 m long, flexible cable and a switching status display on the switch and the adapter. Child-proof. The connected device can be switched on and off easily via the foot...
Corner connector for Max LED strip
Max LED corner connector – max. 144 W The set of four corner connectors for the Max LED strip system also contains eight plug connectors. As such, the strips can be easily adapted for levels and corners, and also shortened. - colour: white - easy installation...
AcTEC LT LED driver CV 12 V, 30 W
Constant voltage LED driver LT 12V 30W, not dimmable - very slim design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0,5 W - Ambient temperature -20 to +50 °C
LED Driver 6 W 24 V for Fabas Luce Galway 6690
LED Driver 6 W 24 V for Fabas Luce Galway 6690 1.5 m connection cable
AcTEC LT LED driver CV 24 V, 30 W
Constant voltage LED driver LT 24V 30W, not dimmable - very slim design - SELV insulation - IP20 - Protection against short circuit, open circuit, overheating and overload - 220-240V, 50-60Hz - Minimum load 0,5 W - Ambient temperature -20 to +50 °C
LED transformer
Transformer - specially designed for LED operation - 12V AC - max. 20 watt - transformer output 20 VA - cable on both sides 20 cm
Paulmann MaxLED Invisible connector 3 m
Practical, self-adhesive MaxLED Invisible Connector with 5-pin plug The MaxLED Invisible Connector is designed for the MaxLED Stripes and offers a practical, invisible connection possibility for several Stripes. This turns the design into a true experience...
LED transformer 1-15 W DC 24 V, 12-way distributor
LED transformer 1-15 W DC 24 V, 12-way distributor - Network connection cable 2 m with Europlug. Connection: 220-240 V/0-50/60 MHz Consumption: 1-15 W Constant 24 V DC Max. feeder length of the secondary cables: 5 m per cable With memory function
Rademacher sun/twilight sensor 1.5 m
Sun sensor for controlling RolloTron and Troll This sensor is available for controlling the shutters on the basis of the light level in conjunction with a RolloTron belt winder or a Troll timer. The light level sensor is fixed to the glass window pane...
92348 transformer 0-40 W LED 0-70 W halogen
Transformer 92348 for halogen or LED lamps This transformer is suitable for both LED lamps and halogen lamps. The transformer also works at low wattages - no minimum load. Technical data: - Wattage LED 0 - 40 W - Wattage halogen 0 - 70 W - 110 - 240 V,...
Primera line DT digital weekly timer
Switch devices on or off automatically with the Primera line DT weekly timer The Primera line DT digital weekly timer is the perfect timer for all electrical devices in the house. With child protection. Technical data: - display for days of the week,...